The Swaging SPIN Tool is designed for the most common tubing diameters in HVAC. The high-temperature method preserves the copper’s/aluminum’s malleability while performing the swage, preventing cracks and leaks. The Swaging Spin Tool is for hard and soft copper tubing. It creates a precises deep swage without wobbling or cracking that is easier to braze.
To top that, you can make swages with the SPIN Swaging Tools in just 5 seconds!
To perform the swage in copper/aluminum tubing, simply attach the corresponding SPIN Tool size to a drill*. Because they perform their job using high-temperature and friction, no clamping tools or holders are necessary. Swages made with the SPIN Tools are compatible with high-pressure refrigerants such as R410a.
All SPIN Tools are designed to work with drills and/or screwdrivers, with a minimum of 1,800 RPM and 500 watts, for corded drills, or superior and 1,800RPM and 18V, or superior, for cordless drills. Using the SPIN Tools with a less powerful equipment tool than suggested, may result decreased and low-quality performances.
FEATURES:
- Flawless swages in five seconds
- Universal drill compatibility
- Reusable tool with long-life design
- Innovative new technology
- Heat by friction
- Works with soft copper creating fewer cracks
- To use with hard cooper just preheat the cooper.
OPTIONS:Â
INCHES
1/4″ – S1014
5/16″ – S1516
3/8″ – S1038
1/2″ – S1012
5/8″ – S1058
3/4″ – S1034
7/8″ – S1078
MM
6mm – S1806
8mm – S1808
10mm – S1810
12mm – S1812
14mm – S1814
15mm – S1815
16mm – S1816
18mm – S1818
19mm – S1819
22mm – S1822
